Free Engineering Books

Here is an alphabetical list of online engineering books available for free download. There are books covering wide areas of electrical and electronic engineering, mechanical engineering, materials science, civil engineering, chemical and bioengineering, telecommunications, signal processing, etc. The books are mainly in PDF format for offline reading, some of them are online only HTML versions. Here is a categorized directory of engineering books. This list will be updated daily.

      

001. Radio Antenna Engineering
       Edmund A. Laport | McGraw-Hill
       Published in 1952, 574 pages

002. Innovations and New Technologies
       Alexander Bolonkin | viXra
       Published in 2013, 310 pages

003. Fast Fourier Transforms
       C. Sidney Burrus, at al. | Connexions
       Published in 2008, 254 pages

004. Microlenses
       Hongrui Jiang (ed.) | MDPI AG
       Published in 2015, 157 pages

005. Analog Circuits
       Yuping Wu (ed.) | InTech
       Published in 2013, 119 pages

006. Statistical Spectral Analysis: A Non-Probabilistic Theory
       William A. Gardner | Prentice Hall
       Published in 1988, 591 pages

007. Frequency Modulation
       August Hund | McGraw-Hill
       Published in 1942, 385 pages

008. The Data Analysis BriefBook
       Rudolf K. Bock, Werner Krischer | Springer
       Published in 2010

009. Seed Factories
       Dani Eder | Wikibooks
       Published in 2013

010. Designing Analog Chips
       Hans Camenzind | Virtualbookworm.com Publishing
       Published in 2005, 242 pages

011. Engineering Thermodynamics
       Charles Edward Lucke | McGraw-Hill
       Published in 1912, 1228 pages

012. Seismic Design for Buildings
        | Dept. of the Army
       Published in 1982, 481 pages

013. Applied Mechanics Dynamics
       G. W. Housner, D. E. Hudson | California Institute of Technology
       Published in 1980, 399 pages

014. Shipbuilding from its beginnings
       Emile van Konijnenburg |
       Published in 1913

015. Heat Transfer: Exercises
       Chris Long, Naser Sayma | BookBoon
       Published in 2010, 89 pages

016. Geometry and Screw Theory for Robotics
       Stefano Stramigioli, Herman Bruyninckx | Universita di Verona
       Published in 2001, 75 pages

017. New Approaches in Automation and Robotics
       Harald Aschemann | InTech
       Published in 2008, 392 pages

018. Water Resources: Planning, Development and Management
       Ralph Wurbs | InTech
       Published in 2013, 182 pages

019. Membrane Bioreactor for Wastewater Treatment
       Jixiang Yang | Bookboon
       Published in 2013, 125 pages

020. Fundamental Numerical Methods and Data Analysis
       George W. Collins, II | NASA ADS
       Published in 2003, 254 pages

021. Introduction to Physical Electronics
       Bill Wilson | Connexions
       Published in 2010, 263 pages

022. Chaotic Systems
       Esteban Tlelo-Cuautle | InTech
       Published in 2011, 310 pages

023. A First Course in Electrical and Computer Engineering
       Louis Scharf | Connexions
       Published in 2008, 319 pages

024. Water Measurement Manual
        | Reclamation Bureau
       Published in 2001, 317 pages

025. Amateur-Built Aircraft and Ultralight Flight Testing Handbook
        | US Government Printing Office
       Published in 1995, 99 pages

026. Fiber Optic Data Communications for the Premises Environment
       Kenneth S. Schneider | Telebyte, Inc.
       Published in 1999, 97 pages

027. Applied Mechanics for Beginners
       John Duncan | Macmillan and co
       Published in 1902, 348 pages

028. Telecommunications Networks: Current Status and Future Trends
       Jesus Hamilton Ortiz | InTech
       Published in 2012, 446 pages

029. Mathematical Methods
       Mihir Sen, Joseph M. Powers | University of Notre Dame
       Published in 2010, 432 pages

030. Climbing and Walking Robots
       Behnam Miripour | InTech
       Published in 2010, 508 pages

031. Mechanical Drawing. Elementary and Advanced
       John S. Reid | J. Wiley & sons
       Published in 1910, 336 pages

032. Space Handbook
       Robert W. Buchheim | RAND Corporation
       Published in 2007, 348 pages

033. Feedback Control Theory
       John Doyle, Bruce Francis, Allen Tannenbaum |
       Published in 1990, 219 pages

034. Separation Processes
       C. Judson King | Center for Studies in Higher Education
       Published in 1980, 888 pages

035. Robot Manipulators: New Achievements
       Aleksandar Lazinica, Hiroyuki Kawai | InTech
       Published in 2010, 718 pages

036. Engineering Fluid Mechanics
       T. Al-Shemmeri | BookBoon
       Published in 2012, 140 pages

037. Schaum's Outline of Theory and Problems of Machine Design
       A.S. Hall, A.R. Holowenko, H.G. Laughlin | McGraw-Hill
       Published in 1961, 344 pages

038. Urban Transportation Networks
       Yosef Sheffi | Prentice Hall
       Published in 1985, 415 pages

039. Control Systems
       Andrew Whitworth | Wikibooks
       Published in 2006, 208 pages

040. Semiconductor Technologies
       Jan Grym | InTech
       Published in 2010, 462 pages

041. Circuit Analysis
       John E. Whitehouse | Horwood Publishing Limited
       Published in 1997, 201 pages

042. Wind Turbines
       T. Al-Shemmeri | BookBoon
       Published in 2010, 88 pages

043. Electrical Generation and Distribution Systems and Power Quality Disturbances
       Gregorio Romero Rey, Luisa Martinez Muneta | InTech
       Published in 2011, 304 pages

044. PIC Microcontrollers: Programming in Basic
       Milan Verle | mikroElektronika
       Published in 2010, 346 pages

045. Control Engineering: An introduction with the use of Matlab
       Derek Atherton | BookBoon
       Published in 2009, 155 pages

046. Drilling Fluid Engineering
       Pal Skalle | BookBoon
       Published in 2010, 126 pages

047. Basics of Space Flight
       Dave Doody | NASA
       Published in 2009, 313 pages

048. Fundamentals of Compressible Fluid Mechanics
       Genick Bar–Meir |
       Published in 2008, 376 pages

049. The WRTI Book of Practical Inventing
       Alan Finn | Bookboon
       Published in 2014, 115 pages

050. Engines and Innovation: Lewis Laboratory and American Propulsion Technology
       Virginia P. Dawson | NASA History Office
       Published in 1991, 276 pages

051. Bioinspiration and Robotics: Walking and Climbing Robots
       Maki K. Habib | InTech
       Published in 2007, 544 pages

052. Introduction to Electronic Engineering
       Valery Vodovozov | BookBoon
       Published in 2010, 135 pages

053. New Generation of Electric Vehicles
       Zoran Stevic (ed.) | InTech
       Published in 2012, 375 pages

054. Essentials of Chemistry
       Soren Prip Beier, Peter Dybdahl Hede | BookBoon
       Published in 2010, 174 pages

055. Fundamentals of Electrical Engineering I
       Don Johnson | Connexions
       Published in 2010, 317 pages

056. Tool Engineering; Jigs And Fixtures
       Albert Atkins Dowd | McGraw-Hill
       Published in 1922, 261 pages

057. Computational Fluid Dynamics
       Abdulnaser Sayma | BookBoon
       Published in 2009, 133 pages

058. Mechanical Vibration
       Janusz Krodkiewski |
       Published in 2008, 247 pages

059. An Introduction to Digital Signal Processing
       J. H. Karl | Academic Press
       Published in 1989

060. Mechanics for Engineers
       Arthur Morley | Longmans
       Published in 1905, 306 pages

061. What's a Microcontroller?
       Andy Lindsay | Parallax Inc.
       Published in 2003, 354 pages

062. Engineering Management
       F.P.G. Maarquez, Benjamin Lev (eds) | InTech
       Published in 2013, 230 pages

063. Hydrodynamics of Pumps
       Christopher E. Brennen | Concepts ETI
       Published in 1994, 293 pages

064. A Heat Transfer Textbook
       John H. Lienhard IV, John H. Lienhard V | Phlogiston Press
       Published in 2003, 762 pages

065. Introduction to the Mathematics of Wavelets
       Willard Miller | University of Minnesota
       Published in 2006, 294 pages

066. Computer Architecture and Interfacing to Mechatronic Systems
       Dario J. Toncich | Chrystobel Engineering
       Published in 1994, 437 pages

067. Engineering Tables
        | Wikibooks
       Published in 2012

068. Introduction To Random Processes
       William A. Gardner | McGraw-Hill
       Published in 1990, 560 pages

069. Stochastic Modeling and Control
       Ivan Ganchev Ivanov (ed.) | InTech
       Published in 2012, 294 pages

070. Process Management
       Maria Pomffyova | InTech
       Published in 2010, 352 pages

071. Mathematics for Engineers
       William Neville Rose | Chapman
       Published in 1922

072. Averting Catastrophe: Strategies for Regulating Risky Technologies
       J. Morone, E. Woodhouse | University of California Press
       Published in 1988, 224 pages

073. Polymer Thin Films
       Abbass A Hashim | InTech
       Published in 2010, 336 pages

074. Natural Disasters
       Sorin Cheval (ed.) | InTech
       Published in 2012, 156 pages

075. Optimization and Control
       Richard Weber | University of Cambridge
       Published in 2010, 70 pages

076. Mechanisms: Materials
       Robert F. Brun, John C. Sheihing | Delmar Publishers
       Published in 1973, 150 pages

077. Text-Book of Theorectical Naval Architecture
       Edward Lewis Attwood | Longmans, Green, and co.
       Published in 1917, 520 pages

078. Basic Concepts in Turbomachinery
       Grant Ingram | BookBoon
       Published in 2009, 144 pages

079. Manufacturing the Future
       V. Kordic, A. Lazinica, M. Merdan | InTech
       Published in 2006, 908 pages

080. Principles of Computerized Tomographic Imaging
       Avinash C. Kak, Malcolm Slaney | IEEE Press
       Published in 1989, 344 pages

081. Earthquake Engineering for Concrete Dams
        | National Academies
       Published in 1990, 165 pages

082. Atmospheric Pollution
       J.C. Jones | BookBoon
       Published in 2008, 109 pages

083. How to design, build and test small liquid-fuel rocket engines
       Leroy J. Krzycki | Rocketlab
       Published in 1967, 66 pages

084. Introduction to Embedded Systems
       Edward A. Lee, Sanjit A. Seshia | Lulu.com
       Published in 2011, 501 pages

085. Aerodynamics
       N. A. V. Piercy | English University Press
       Published in 1947, 566 pages

086. Applied Mechanics of Solids
       Allan F. Bower | CRC Press
       Published in 2011, 820 pages

087. Discrete Wavelet Transforms: A Compendium of New Approaches and Recent Applications
       Awad Kh. Al - Asmari (ed.) | InTech
       Published in 2013, 222 pages

088. Frontiers in Guided Wave Optics and Optoelectronics
       Bishnu Pal | InTech
       Published in 2010, 690 pages

089. Robot Manipulators
       Marco Ceccarelli | InTech
       Published in 2008, 546 pages

090. Mechanics: Problems for Engineering Students
       Frank Berry Sanborn | J. Wiley & sons
       Published in 1906, 212 pages

091. Control in an Information Rich World
       Richard M. Murray | Society for Industrial Mathematics
       Published in 2002, 112 pages

092. Introduction to Signal Processing
       Sophocles J. Orfanidis | Prentice Hall
       Published in 2009, 398 pages

093. Lectures on Stochastic Control and Nonlinear Filtering
       M. H. A. Davis | Tata Institute of Fundamental Research
       Published in 1984, 112 pages

094. Acceptable Risk?: Making Decisions in a Toxic Environment
       Lee Clarke | University of California Press
       Published in 1991, 242 pages

095. Mechanisms / Linkages
       L.P. Robertson, et al. | Delmar Publishers
       Published in 1972, 285 pages

096. Embedded Systems
        | Wikibooks
       Published in 2012, 128 pages

097. Introduction to Modern Instrumentation: For Hydraulics and Environmental Sciences
       D. O. Guaraglia, J. L. Pousa | De Gruyter Open
       Published in 2014, 432 pages

098. Introduction to the Aerodynamics of Flight
       Theodore A. Talay | NASA History Division
       Published in 1975, 198 pages

099. Wavelet Transform and Some of Its Real-World Applications
       Dumitru Baleanu (ed.) | InTech
       Published in 2015, 132 pages

100. PIC Microcontrollers
       Milan Verle | mikroElektronika
       Published in 2008, 394 pages

101. Energy Efficiency Solutions for Historic Buildings
       Alexandra Troi, Zeno Bastian | Birkhäuser
       Published in 2014, 336 pages

102. The Age of Invention: A Chronicle of Mechanical Conquest
       Holland Thompson | ManyBooks
       Published in 1921, 166 pages

103. Environmental Fluid Mechanics 1: Mixing and Transport Processes in the Environment
       Scott A. Socolofsky, Gerhard H. Jirka | Texas A&M University
       Published in 2005, 184 pages

104. Engineer's Mini-Notebook: Formulas, Tables and Basic Circuits
       Forrest M. Mims III | Radio Shack
       Published in 1993, 52 pages

105. Applied Mechanics for Engineers
       John Duncan | Macmillan and co
       Published in 1913, 748 pages

106. Signal Processing
       Sebastian Miron | InTech
       Published in 2010, 536 pages

107. Lectures on Computational Fluid Dynamics
       Nikolai Kornev, Irina Cherunova | Bookboon
       Published in 2015, 205 pages

108. Engineering Acoustics
        | Wikibooks
       Published in 2006, 205 pages

109. Robotics
        | Wikibooks
       Published in 2012

110. Distributed Control of Robotic Networks
       Francesco Bullo, Jorge Cortes, Sonia Martinez | Princeton University Press
       Published in 2009, 323 pages

111. Mechanical Metallurgy
       George Ellwood Dieter | McGraw-Hill
       Published in 1961, 650 pages

112. Space Transport and Engineering Methods
        | Wikibooks
       Published in 2017, 328 pages

113. Project Management for Construction
       Chris Hendrickson, Tung Au | Prentice Hall
       Published in 1989, 496 pages

114. Applications and Experiences of Quality Control
       Ognyan Ivanov | InTech
       Published in 2011, 704 pages

115. Britney Spears' Guide to Semiconductor Physics
       Carl Hepburn |
       Published in 2009

116. Marine Pollution
       Geert Potters | Bookboon
       Published in 2013, 231 pages

117. A Foundation in Digital Communication
       Amos Lapidoth | Cambridge University Press
       Published in 2009, 749 pages

118. Climbing and Walking Robots: Towards New Applications
       Houxiang Zhang | InTech
       Published in 2007, 546 pages

119. Mobile Robotics
       Paul Michael Newman |
       Published in 2003, 114 pages

120. Momentum, Heat, and Mass Transfer
       Leo Lue | Bookboon
       Published in 2014, 106 pages

121. Optomechatronics
       Alexander W. Koch (ed.) | MDPI AG
       Published in 2014, 278 pages

122. An Introduction to Wavelet Analysis
       Veronique Delouille | Connexions
       Published in 2009, 38 pages

123. Biomass Properties and Fire Prediction Tools
       Miltiadis Boboulos | BookBoon
       Published in 2010, 61 pages

124. Science For Coalmining Students
       H. Morton, D. S. Morton | The Technical Press
       Published in 1952, 274 pages

125. Mechanisms / Drives
       Richard W. Tinnell | Delmar Publishers
       Published in 1971, 280 pages

126. Reinforced Concrete: Theory and Practice
       Frederick Rings | Batsford
       Published in 1910, 252 pages

127. Introduction to Arduino: A Piece of Cake
       Alan Smith | IntroToArduino.com
       Published in 2011, 172 pages

128. Control Engineering Problems with Solutions
       Derek P. Atherton | Bookboon
       Published in 2013, 200 pages

129. DNA polymerases in Biotechnology
       Zvi Kelman, Andrew F. Gardner (eds) | Frontiers Media SA
       Published in 2014, 147 pages

130. Organic Semiconductors
       Mohan Jacob (ed.) | MDPI AG
       Published in 2015, 264 pages

131. Radiation Effects in Materials
       Waldemar A. Monteiro (ed.) | InTech
       Published in 2016, 460 pages

132. Heat Exchangers: Design, Experiment and Simulation
       S M Sohel Murshed, Manuel Matos Lopes (eds) | InTech
       Published in 2017, 270 pages

133. Multiprocessor Scheduling, Theory and Applications
       Eugene Levner | InTech
       Published in 2007, 436 pages

134. Principles of Control Systems Engineering
       Vincent Del Toro, Sydney R. Parker | McGraw-Hill
       Published in 1960, 686 pages

135. Stochastic Optimal Control: The Discrete-Time Case
       Dimitri P. Bertsekas, Steven E. Shreve | Athena Scientific
       Published in 1996, 331 pages

136. Communication Systems
       Janko Calic | Connexions
       Published in 2009, 158 pages

137. Intelligent and Biosensors
       Vernon S. Somerset | InTech
       Published in 2010, 396 pages

138. Hydrocarbons
       Author J. C. Jones | BookBoon
       Published in 2010, 111 pages

139. Advances in Sonar Technology
       Sergio Rui Silva | InTech
       Published in 2009, 450 pages

140. Power Factor Correction (PFC) Handbook
        | ON Semiconductor
       Published in 2007, 208 pages

141. Mathematics of the Discrete Fourier Transform (DFT): with Audio Applications
       Julius O. Smith III | W3K Publishing
       Published in 2007, 322 pages

142. Mass Transfer in Chemical Engineering Processes
       Jozef Markoš | InTech
       Published in 2011, 306 pages

143. The Fourier Transform and its Applications
       Brad Osgood | Stanford University
       Published in 2009, 428 pages

144. CAD-CAM and Rapid Prototyping Application Evaluation
       Miltiadis A. Boboulos | BookBoon
       Published in 2010, 174 pages

145. Concise Signal Models
       Michael Wakin | Connexions
       Published in 2009, 55 pages

146. Concurrent Engineering
       Peter Burke, et al. | Wikibooks
       Published in 2009

147. Modeling Flight
       Joseph R. Chambers | NASA
       Published in 2010, 202 pages

148. Plank-And-Beam Framing for Residential Buildings
        | American Wood Council
       Published in 2003, 40 pages

149. High Performance Control
       T.T. Tay, I.M.Y. Mareels, J.B. Moore | Birkhauser
       Published in 1997, 362 pages

150. Carbon Nanotubes: Applications on Electron Devices
       Jose Mauricio Marulanda | InTech
       Published in 2011, 556 pages

151. Storage Stability of Fuels
       Krzysztof Biernat (ed.) | InTech
       Published in 2015, 276 pages

152. Engineering Statistics and Quality Control
       Irving W. Burr | McGraw-Hill
       Published in 1953

153. The Calculus for Engineers
       John Perry | E. Arnold
       Published in 1897, 408 pages

154. Thermal Power Plants: Advanced Applications
       Mohammad Rasul (ed.) | InTech
       Published in 2013, 178 pages

155. Principles of Digital Communication and Coding
       Andrew J. Viterbi, Jim K. Omura | McGraw-Hill
       Published in 1979, 576 pages

156. NASA Engineers and the Age of Apollo
       Sylvia Doughty Fries | NASA History Office
       Published in 1992, 216 pages

157. Imagining the Future City: London 2062
       Sarah Bell, James Paskins (eds) | Ubiquity Press
       Published in 2013, 194 pages

158. Leak Detection: Technology and Implementation
       Stuart Hamilton, Bambos Charalambus | IWA Publishing
       Published in 2013, 106 pages

159. OpenSCAD User Manual
        | Wikibooks
       Published in 2013

160. Fluid Bed Particle Processing
       Peter Dybdahl Hede | BookBoon
       Published in 2006, 80 pages

161. Mechanical Properties of Materials
       David Roylance | MIT
       Published in 2008, 128 pages

162. Engineering Reliability: New Techniques and Applications
       B. S. Dhillon, Chanan Singh | John Wiley & Sons
       Published in 1981, 362 pages

163. Process Control Fundamentals
        | PAControl.com
       Published in 2006, 73 pages

164. Remote and Telerobotics
       Nicolas Mollet | InTech
       Published in 2010, 228 pages

165. Mechanics: A Textbook for Engineers
       James E. Boyd | McGraw-Hill
       Published in 1921, 446 pages

166. Electronics
        | Wikibooks
       Published in 2012

167. Mixed-signal and DSP Design Techniques
       Walt Kester | Newnes
       Published in 2002, 368 pages

168. Discrete Time Systems
       Mario Alberto Jordan | InTech
       Published in 2011, 526 pages

169. NASA at 50: Interviews with NASA's Senior Leadership
       Rebecca Wright, Sandra Johnson, Steven J. Dick | NASA
       Published in 2012, 359 pages

170. Digital Systems Design
       Ramaswamy Palaniappan | BookBoon
       Published in 2011, 130 pages

171. Robot Arms
       Satoru Goto | InTech
       Published in 2011, 262 pages

172. An Introduction to Statistical Signal Processing
       R. M. Gray, L. D. Davisson | Cambridge University Press
       Published in 2005, 478 pages

173. Manufacturing Processes and Materials: Exercises
       Miltiadis A. Boboulos | BookBoon
       Published in 2010, 124 pages

174. Chemistry, Emission Control, Radioactive Pollution and Indoor Air Quality
       Nicolas Mazzeo | InTech
       Published in 2011, 680 pages

175. Computer Analysis & Reinforced Concrete Design of Beams
       Fady R. S. Rostom | Fadzter Media
       Published in 2008, 129 pages

176. Patterns for Time-Triggered Embedded Systems
       Michael Pont | Addison-Wesley Professional
       Published in 2001, 1027 pages

177. Wooden Ship-Building
       Charles Desmond | Rudder Pub. Co
       Published in 1919, 240 pages

178. Waste Management
       Er Sunil Kumar | InTech
       Published in 2010, 240 pages

179. Offshore Hydromechanics
       J.M.J. Journée, W.W. Massie | Delft University of Technology
       Published in 2001, 570 pages

180. Synthetic Strategies in Chemistry
       B. Viswanathan | Indian Institute of Technology
       Published in 2008, 361 pages

181. Aircraft Weight and Balance Handbook
        | Federal Aviation Administration
       Published in 2007, 97 pages

182. OrCAD PSpice A/D Reference Manual
        | OrCAD
       Published in 1998, 367 pages

183. Electromagnetic Waves Propagation in Complex Matter
       Ahmed Kishk | InTech
       Published in 2011, 292 pages

184. Heat Treatment: Conventional and Novel Applications
       Frank Czerwinski (ed.) | InTech
       Published in 2012, 408 pages

185. Electromechanisms: Motor Controls
       D.A. Anderson | Delmar Publishers
       Published in 1971, 148 pages

186. Digital Encoding and Decoding
       George Benthien |
       Published in 2010, 22 pages

187. Frontiers in Advanced Control Systems
       Ginalber Luiz de Oliveira Serra (ed.) | InTech
       Published in 2012, 278 pages

188. Advances in Service Robotics
       Ho Seok Ahn | IN-TECH
       Published in 2008, 342 pages

189. Mechanics of Engineering
       Irving Porter Church | John Wiley & Sons
       Published in 1908, 922 pages

190. Wood Handbook: Wood as an Engineering Material
       Richard Bergman, et al. | Forest Products Laboratory
       Published in 2010, 509 pages

191. Wireless Networking in the Developing World
       The WNDW Production Team | Lulu.com
       Published in 2006, 425 pages

192. Structure and Interpretation of Signals and Systems
       E. A. Lee, P. Varaiya | Addison Wesley
       Published in 2002, 604 pages

193. Carbon Nanotubes
       Jose Mauricio Marulanda | InTech
       Published in 2010, 766 pages

194. Global Navigation Satellite Systems: Signal, Theory and Applications
       Shuanggen Jin | InTech
       Published in 2012, 426 pages

195. Handbook of Formulae and Physical Constants
        | Power Engineering Training Systems
       Published in 2003, 43 pages

196. Recycling Materials Based on Environmentally Friendly Techniques
       Dimitris S. Achilias (ed.) | InTech
       Published in 2015, 124 pages

197. Methods in Industrial Biotechnology for Chemical Engineers
       W. B. V. Kandasamy, F. Smarandache | InfoLearnQuest
       Published in 2008, 126 pages

198. Nanocrystal
       Yoshitake Masuda | InTech
       Published in 2011, 494 pages

199. Wireless Communications: Signal Processing Perspectives
       H. V. Poor, G. W. Wornell | Prentice-Hall, Inc.
       Published in 1998, 409 pages

200. Fundamental Quantum Mechanics for Engineers
       Leon van Dommelen |
       Published in 2009, 783 pages

201. Fourier and Wavelet Signal Processing
       Martin Vetterli, Jelena Kovacevic, Vivek K Goyal |
       Published in 2011, 825 pages

202. Roller Coaster Physics
       Tony Wayne | VAST
       Published in 1998, 155 pages

203. Digital Filters and Signal Processing
       F.P.G. Marquez, N. Zaman (ed.) | InTech
       Published in 2013, 307 pages

204. Nonlinear Parameter Estimation: An Integrated System in Basic
       John C. Nash | Marcel Dekker Inc
       Published in 1995, 493 pages

205. Cellular Networks: Positioning, Performance Analysis, Reliability
       Agassi Melikov | InTech
       Published in 2011, 404 pages

206. Protein Engineering: Technology and Application
       Tomohisa Ogawa | InTech
       Published in 2013, 187 pages

207. PaulOS: An 8051 Real-Time Operating System
       Paul P. Debono | Bookboon
       Published in 2013, 470 pages

208. Robot Localization and Map Building
       Hanafiah Yussof | InTech
       Published in 2010, 586 pages

209. Robot Manipulators: Trends and Development
       Agustin Jimenez, Basil M Al Hadithi | InTech
       Published in 2010, 676 pages

210. IP Telephony Cookbook
       Margit Brandl, at al. | TERENA
       Published in 2004, 228 pages

211. White organic light-emitting diodes: Status and perspective
       S. Reineke, M. Thomschke, B. Lüssem, K. Leo | arXiv
       Published in 2013, 53 pages

212. Tribology in Engineering
       Hasim Pihtili (ed.) | InTech
       Published in 2013, 240 pages

213. Coal Pyrolysis
       George R. Gavalas | Elsevier
       Published in 1982, 177 pages

214. Earthquake Engineering
       Halil Sezen (ed.) | InTech
       Published in 2012, 336 pages

215. Introduction to Mechanics of Materials
       Roland Jančo; Branislav Hučko | Bookboon
       Published in 2013, 394 pages

216. Applied Ecology
        | Wikibooks
       Published in 2010

217. Circuit Theory
        | Wikibooks
       Published in 2013, 153 pages

218. Aerial Vehicles
       Thanh Mung Lam | InTech
       Published in 2009, 320 pages

219. Practical Chemistry for Engineering Students
       Arthur James Hale | Longmans, Green, and Co.
       Published in 1912, 220 pages

220. Coal and the Environment
       S. F. Greb, C. F. Eble, D. C. Peters, A. R. Papp | American Geological Institute
       Published in 2006, 68 pages

221. Optimum Signal Processing
       Sophocles J. Orfanidis |
       Published in 2007, 391 pages

222. Greenlanders, Whales, and Whaling: Sustainability and Self-Determination in the Arctic
       Richard A. Caulfield | University Press of New England
       Published in 1997, 219 pages

223. The Analysis of Stress and Deformation
       G. W. Housner, T. Vreeland Jr. | California Institute of Technology
       Published in 1965, 448 pages

224. Biomedical Imaging
       Youxin Mao | InTech
       Published in 2010, 108 pages

225. DSP: Designing for Optimal Results
        | Xilinx, Inc.
       Published in 2005, 116 pages

226. Intelligent Control
       P. J. Antsaklis |
       Published in 1997, 22 pages

227. Mathematics Formulary
       Johan Wevers |
       Published in 2008, 65 pages

228. Lecture Notes on Intermediate Thermodynamics
       Joseph M. Powers | University of Notre Dame
       Published in 2010, 289 pages

229. A Mathematical Theory of Communication
       Claude Shannon |
       Published in 1948, 79 pages

230. Mechanics of Materials
       Madhukar Vable | Michigan Technological University
       Published in 2009

231. Hydrodynamics: Natural Water Bodies
       Harry Edmar Schulz, et al. | InTech
       Published in 2012, 286 pages

232. Advances in Satellite Communications
       Masoumeh Karimi, Yuri Labrador | InTech
       Published in 2011, 194 pages

233. Nanotechnology
        | Wikibooks
       Published in 2010

234. An Introduction to Electronics
        | Wikipedia
       Published in 2013

235. Cutting Edge Robotics
       V. Kordic, A. Lazinica, M. Merdan | InTech
       Published in 2005, 784 pages

236. Electric Drive Systems and Operation
       Valery Vodovozov | BookBoon
       Published in 2012, 102 pages

237. Orders of Magnitude: A History of the NACA and NASA, 1915-1990
       Roger E. Bilstein | United States Government Printing
       Published in 1989, 167 pages

238. New Tribological Ways
       Taher Ghrib | InTech
       Published in 2011, 498 pages

239. Electromechanisms: Fabrication
       K. Paul | Delmar Publishers
       Published in 1973, 42 pages

240. Principles of Semiconductor Devices
       Bart Van Zeghbroeck |
       Published in 2007

241. Biomechanics
        | Wikibooks
       Published in 2010

242. Trends in Telecommunications Technologies
       Christos J Bouras | InTech
       Published in 2010, 778 pages

243. Introduction to Microcontrollers
       Guenther Gridling, Bettina Weiss | Vienna University of Technology
       Published in 2007, 175 pages

244. Communication Systems
        | Wikibooks
       Published in 2011, 162 pages

245. Introduction to Digital Filters: with Audio Applications
       Julius O. Smith III | W3K Publishing
       Published in 2007, 478 pages

246. Physical Audio Signal Processing
       Julius O. Smith III | DSPRelated.com
       Published in 2007

247. Architecture and Programming of 8051 Microcontrollers
       Milan Verle | mikroElektronika
       Published in 2010

248. Hydrostatics and Pneumatics
       Philip Magnus | Longmans
       Published in 1891, 189 pages

249. Mechanisms / Machines
       Larry Teel | Delmar Publishers
       Published in 1972, 177 pages

250. A Manual Of Land Surveying
       F. Hodgman | F. Hodgman Co.
       Published in 1907, 584 pages

251. Computational Fluid Dynamics: Technologies and Applications
       Igor V. Minin, Oleg V. Minin | InTech
       Published in 2011, 396 pages

252. Applied Strength of Materials for Engineering Technology
       Barry Dupen | Purdue University
       Published in 2012, 161 pages

253. The Apollo Spacecraft: A Chronology
       Ivan D. Ertel, at al. | NASA
       Published in 2007

254. Magnetic Resonance Sensors
       Robert H. Morris, Michael I. Newton (eds) | MDPI AG
       Published in 2015, 223 pages

255. Solid Mechanics Lecture Notes
       Piaras Kelly | The University of Auckland
       Published in 2013

256. Transportation Economics
       D. Levinson, D. Gillen, M. Iacono | Wikibooks
       Published in 2011

257. The Application of Hyperbolic Functions to Electrical Engineering Problems
       A. E. Kennelly | McGraw-Hill
       Published in 1916, 324 pages

258. Facing the Heat Barrier: A History of Hypersonics
       T. A. Heppenheimer | NASA
       Published in 2007, 336 pages

259. Metallography and Microstructure of Ancient and Historic Metals
       David A. Scott | Oxford University Press
       Published in 1991, 176 pages

260. Electric Load Forecasting: Fundamentals and Best Practices
       Tao Hong, David A. Dickey | OTexts
       Published in 2015, 306 pages

261. Remembering the Space Age
       Steven J. Dick | NASA
       Published in 2009, 478 pages

262. Advancement in Microstrip Antennas with Recent Applications
       Ahmed Kishk | InTech
       Published in 2013, 383 pages

263. Supply Chain Management
       Pengzhong Li | InTech
       Published in 2011, 590 pages

264. Introduction to Digital Logic with Laboratory Exercises
       James Feher | Global Text Project
       Published in 2010, 100 pages

265. Modeling Reactive Systems with Statecharts
       D. Harel, M. Politi | McGraw-Hill
       Published in 1998, 258 pages

266. Fundamentals of Reaction Engineering - Examples
       Rafael Kandiyoti | BookBoon
       Published in 2009, 41 pages

267. Basic Queueing Theory
       Janos Sztrik | University of Debrecen
       Published in 2012, 193 pages

268. Applied Mechanics and Strength of Materials
       A.B. Clemens | International TextBook Company
       Published in 1906, 367 pages

269. Mathematical Methods of Engineering Analysis
       Erhan Cinlar, Robert J. Vanderbei |
       Published in 2000, 119 pages

270. The Mechanical Properties of Wood
       Samuel J. Record |
       Published in 1914

271. Structural Engineering, Analysis and Design
       Victor E. Saouma | University of Colorado, Boulder
       Published in 2004, 142 pages

272. Helicopter Aerodynamics
       D. I. Bazov | NASA
       Published in 1972, 295 pages

273. Wavelets and their Applications in Computer Graphics
       Alain Fournier |
       Published in 1995, 239 pages

274. Clock and Data Recovery
        | Wikibooks
       Published in 2014, 197 pages

275. Discrete-Event Control of Stochastic Networks: Multimodularity and Regularity
       Eitan Altman, Bruno Gaujal, Arie Hordijk | Springer
       Published in 2003, 325 pages

276. Nanowires Science and Technology
       Nicoleta Lupu | InTech
       Published in 2010, 410 pages

277. Profit Signals: How Evidence Based Decisions Power Six Sigma Breakthroughs
       M. Daniel Sloan, Russell A. Boyles | Evidence-Based Decisions, Inc.
       Published in 2003, 262 pages

278. Urban Travel Demand: A Behavioral Analysis
       Tom Domencich, Daniel L. McFadden | North-Holland Publishing
       Published in 1975, 215 pages

279. Lectures on Ship Manoeuvrability
       Nikolai Kornev | Bookboon
       Published in 2013, 177 pages

280. Boat-Building and Boating
       Daniel Carter Beard | Charles Scribner's Sons
       Published in 1931, 194 pages

281. Communication Network Analysis
       Bruce Hajek |
       Published in 2006, 204 pages

282. An Introduction to Mathematical Optimal Control Theory
       Lawrence C. Evans | University of California, Berkeley
       Published in 2010, 126 pages

283. Antennas: Theory and Practice
       S.A. Schelkunoff | J. Wiley
       Published in 1952, 672 pages

284. Recent Advances in Multi Robot Systems
       Aleksandar Lazinica | InTech
       Published in 2008, 326 pages

285. Power Electronics: Devices, Drivers, Applications, and Passive Components
       Barry W. Williams |
       Published in 2006, 600 pages

286. Lessons In Electric Circuits
       Tony R. Kuphaldt | ibiblio.org
       Published in 2008

287. Mathematical Control Theory: Deterministic Finite Dimensional Systems
       Eduardo D. Sontag | Springer
       Published in 1998, 544 pages

288. Biomedical Engineering: Technical Applications in Medicine
       R. Hudak, M. Penhaker, J. Majernik | InTech
       Published in 2012, 420 pages

289. The Unauthorized Biography of the Baby Bells and Info-Scandal
       Bruce Kushnick | New Networks Institute
       Published in 1999, 464 pages

290. Fundamentals of Wireless Communication
       David Tse, Pramod Viswanath | Cambridge University Press
       Published in 2005, 586 pages

291. Mechanics of Rigid Body
       Janusz Krodkiewski |
       Published in 2008, 195 pages

292. Understanding the Global Energy Crisis
       Eugene D. Coyle, Richard A. Simmons | Purdue University Press
       Published in 2014, 320 pages

293. Climate and Transportation Solutions
       Daniel Sperling, James S. Cannon | CreateSpace
       Published in 2010, 230 pages

294. Power Quality
       Andreas Eberhard | InTech
       Published in 2011, 362 pages

295. Mathematics For Engineering Students
       Samuel Keller | D. Van Nostrand Company
       Published in 1908, 376 pages

296. Behaviour of Electromagnetic Waves in Different Media and Structures
       Ali Akdagli | InTech
       Published in 2011, 440 pages

297. Electrical Power
       W. J. R. H. Pooler | Bookboon
       Published in 2014, 219 pages

298. Shape Interrogation for Computer Aided Design and Manufacturing
       Nicholas M. Patrikalakis, Takashi Maekawa | Springer
       Published in 2009, 408 pages

299. Geology for Engineers
       Robert Fox Sorsbie | Griffin
       Published in 1911, 464 pages

300. Challenges and Paradigms in Applied Robust Control
       Andrzej Bartoszewicz | InTech
       Published in 2011, 460 pages

301. Wingless Flight: The Lifting Body Story
       R. Dale Reed | NASA History Office
       Published in 2005, 256 pages

302. Introduction to PLC controllers
       Nebojsa Matic | mikroElektronika
       Published in 2003

303. Electromagnetism for Electronic Engineers
       Richard Carter | BookBoon
       Published in 2009, 158 pages

304. Mechanics of Solids and Fracture
       Ho Sung Kim | Bookboon
       Published in 2013, 223 pages

305. Feedback Systems: An Introduction for Scientists and Engineers
       Karl J. Astrom, Richard M. Murray | Princeton University Press
       Published in 2008, 408 pages

306. The Secret of Flight
       Johan Hoffman, Johan Jansson, Claes Johnson |
       Published in 2008, 128 pages

307. Service Robot Applications
       Yoshihiko Takahashi | InTech
       Published in 2008, 400 pages

308. Lecture Notes on Gas Dynamics
       Joseph M. Powers | University of Notre Dame
       Published in 2012, 166 pages

309. PIC microcontrollers, for beginners too
       Nebojsa Matic | mikroElektronika
       Published in 2003

310. Nautical Charts
       G. R. Putnam | J. Wiley
       Published in 1908, 206 pages

311. Control Theory with Applications to Naval Hydrodynamics
       R. Timman |
       Published in 1975, 84 pages

312. Sustainable Energy - Without the Hot Air
       David JC MacKay | UIT Cambridge Ltd.
       Published in 2009, 383 pages

313. Factory Automation
       Javier Silvestre-Blanes | InTech
       Published in 2010, 612 pages

314. Overview of Safety Instrumented Systems
       IDC Technologies |
       Published in 2013, 63 pages

315. The A B C of Mining
       Charles A. Bramble | Rand, McNally & Co.
       Published in 1898, 196 pages

316. Photodiodes: From Fundamentals to Applications
       Ilgu Yun | InTech
       Published in 2012, 368 pages

317. Humanoid Robots: New Developments
       Armando Carlos de Pina Filho | InTech
       Published in 2007, 582 pages

318. The Art of Insight in Science and Engineering: Mastering Complexity
       Sanjoy Mahajan | The MIT Press
       Published in 2014, 409 pages

319. Energy Conversion
       Kenneth Weston | PWS
       Published in 1992

320. Advanced Model Predictive Control
       Tao Zheng | InTech
       Published in 2011, 418 pages

321. Frontiers in Chemistry
       B Viswanathan | National Centre for Catalysis Research
       Published in 2007, 231 pages

322. The Boundary Element Method in Acoustics
       Stephen Kirkup | Integrated Sound Software
       Published in 2007, 161 pages

323. Practical Optimization: A Gentle Introduction
       John W. Chinneck | Carleton University
       Published in 2009

324. Electromagnetic Waves
       Vitaliy Zhurbenko | InTech
       Published in 2011, 510 pages

325. Enzymes and Their Biotechnological Applications
       Pabulo H. Rampelotto (ed.) | MDPI AG
       Published in 2015, 468 pages

326. Digital Filters
       Fausto Pedro García Marquez | InTech
       Published in 2011, 290 pages

327. Sustainability: A Comprehensive Foundation
       Tom Theis, Jonathan Tomkin (eds) | Connexions
       Published in 2012, 643 pages

328. Data Conversion Handbook
       Engineering Staff Analog Devices Inc. | Newnes
       Published in 2005, 976 pages

329. Concise Hydraulics
       Dawei Han | BookBoon
       Published in 2008, 177 pages

330. The Development and Application of Microwave Heating
       Wenbin Cao (ed.) | InTech
       Published in 2012, 212 pages

331. Computational Electromagnetism: Variational Formulations, Complementarity, Edge Elements
       Alain Bossavit | Academic Press
       Published in 1997, 352 pages

332. Progress in Biomass and Bioenergy Production
       Syed Shahid Shaukat | InTech
       Published in 2011, 444 pages

333. Linear Matrix Inequalities in System and Control Theory
       S. Boyd, L. El Ghaoui, E. Feron, V. Balakrishnan |
       Published in 1997, 205 pages

334. Methods and Techniques in Urban Engineering
       A. C. de Pina Filho and A. C. de Pina | InTech
       Published in 2010, 270 pages

335. Unsaturated Zone Hydrology for Scientists and Engineers
       James Tindall, James Kunkel | Pearson Education
       Published in 1998, 624 pages

336. Fundamentals of Aerospace Engineering
       Manuel Soler | Create Space
       Published in 2014, 404 pages

337. Green Products by Design: Choices for a Cleaner Environment
        | University Press of the Pacific
       Published in 1992, 119 pages

338. Electrochemistry
       Mohammed A. A. Khalid (ed.) | InTech
       Published in 2013, 198 pages

339. Convection and Conduction Heat Transfer
       Amimul Ahsan | InTech
       Published in 2011, 394 pages

340. Analytical Mechanics for Engineers
       Fred B. Seely | J. Wiley & sons
       Published in 1921, 516 pages

341. PID Control: Implementation and Tuning
       Tamer Mansour | InTech
       Published in 2011, 238 pages

342. Introduction in Ship Hydromechanics
       J.M.J. Journée and Jakob Pinkster | Delft University of Technology
       Published in 2002, 107 pages

343. Automation and Robotics
       Juan Manuel Ramos Arreguin | InTech
       Published in 2008, 388 pages

344. Higher Mathematics for Engineers and Physicists
       Ivan S. Sokolnikoff | McGraw Hill
       Published in 1941, 537 pages

345. Planning Algorithms
       Steven M. LaValle | Cambridge University Press
       Published in 2006, 842 pages

346. Electromechanisms: Devices
       L. Paul Robertson, Bob R. Hunter, Richard L. Allan | Delmar Publishers
       Published in 1971, 76 pages

347. A Pragmatic Introduction to the Art of Electrical Engineering
       Paul H. Dietz |
       Published in 2003, 142 pages

348. Glossary of Combustion
       Maximilian Lackner | Bookboon
       Published in 2014, 288 pages

349. Understanding Electronics Components
       Filipovic D. Miomir | mikroElektronika
       Published in 2008

350. The Economics of Transportation Systems: A reference for practitioners
       K. Kockelman, D. Chen, K. Larsen, B. Nichols | The University of Texas
       Published in 2013, 310 pages

351. Global Climate Change Impacts in the United States
       Thomas R. Karl, at al. | Cambridge University Press
       Published in 2009, 196 pages

352. Tsunami Science and Engineering
       Valentin Heller (ed.) | MDPI AG
       Published in 2016, 332 pages

353. Beyond Horizons: A Half Century of Air Force Space Leadership
       David N. Spires | AU Press
       Published in 1998, 422 pages

354. An Introduction to Solving Engineering Problems with Matlab
       Darryl Morrell | CK-12 Foundation
       Published in 2009, 71 pages

355. Machine Shop Work
       Frederick W. Turner | American technical society
       Published in 1918, 384 pages

356. Advanced Magnetic Materials
       Leszek Malkinski (ed.) | InTech
       Published in 2012, 230 pages

357. R. R. Bahadur's Lectures on the Theory of Estimation
       Raghu Raj Bahadur, at al. | IMS
       Published in 2002, 82 pages

358. Heat Conduction: Basic Research
       Vyacheslav S. Vikhrenko | InTech
       Published in 2011, 350 pages

359. The Practical Streambank Bioengineering Guide
       Gary Bentrup | USDA
       Published in 1998, 150 pages

360. Introduction to Electromagnetic Engineering
       Roger F. Harrington | McGraw-Hill
       Published in 1958, 312 pages

361. A Short Course in Elementary Mechanics for Engineers
       Clifford Newton Mills | D. Van Nostrand Company
       Published in 1916, 156 pages

362. Electronics / Amplifiers
       Richard W. Tinnell | Delmar Publishers
       Published in 1972, 306 pages

363. Environmental Technologies
       E. Burcu Ozkaraova Gungor | InTech
       Published in 2008, 268 pages

364. Microwave and Millimeter Wave Technologies
       Igor Minin | InTech
       Published in 2010, 498 pages

365. Distributed-Parameter Port-Hamiltonian Systems
       Hans Zwart, Birgit Jacob | CIMPA
       Published in 2009, 208 pages

366. Development and Implementation of RFID Technology
       Cristina Turcu | InTech
       Published in 2009, 564 pages

367. Geothermal Energy: Delivering on the Global Potential
       Paul L. Younger (ed.) | MDPI AG
       Published in 2015, 431 pages

368. Spacecraft Dynamics
       Thomas R. Kane | McGraw Hill
       Published in 1983, 436 pages

369. Shipbuilding for Beginners
       Andrew Williams Carmichael |
       Published in 1918, 36 pages

370. Introduction to Environmental Economics
       Arthur A. Small | OTexts
       Published in 2016, 406 pages

371. Environmental Management in Practice
       Elzbieta Broniewicz | InTech
       Published in 2011, 448 pages

372. The Best Transportation System in the World
       M.H. Rose, B.E. Seely, P.F. Barrett | The Ohio State University Press
       Published in 2006, 346 pages

373. An Introduction to Energy Sources
       B Viswanathan | Indian Institute of Technology
       Published in 2006, 289 pages

374. Effective Chemistry Communication in Informal Environments
        | National Academies Press
       Published in 2016, 169 pages

375. Pursuit of Power: NASA's Propulsion Systems Laboratory No. 1 and 2
       Robert S. Arrighi | NASA
       Published in 2012, 294 pages

376. PIC Microcontrollers - Programming in C
       Milan Verle | mikroElektronika
       Published in 2009, 336 pages

377. Application-Specific Integrated Circuits
       Michael John Sebastian Smith | Addison-Wesley Professional
       Published in 2008, 1040 pages

378. Thermokinetics
       V. A. Etkin | viXra
       Published in 2010, 341 pages

379. Study and Implementation of Image and Video Matting Techniques
       Siddharth Srivastava, et al. | viXra
       Published in 2013, 59 pages

380. Systems Structure and Control
       Petr Husek | InTech
       Published in 2008, 248 pages

381. Concepts in Electric Circuits
       Wasif Naeem | BookBoon
       Published in 2009, 87 pages

382. Applied Aerodynamics
       Jorge Colman Lerner, Ulfilas Boldes | InTech
       Published in 2012, 192 pages

383. Numerical Methods and Modeling for Chemical Engineers
       Mark E. Davis | John Wiley & Sons
       Published in 1984, 267 pages

384. The Analysis of Feedback Systems
       Jan C. Willems | The MIT Press
       Published in 1971, 100 pages

385. Optimal Control: Linear Quadratic Methods
       B.D.O. Anderson, J.B. Moore | Prentice-Hall
       Published in 1989, 394 pages

386. Water Pollution
       Nuray Balkis | InTech
       Published in 2012, 202 pages

387. Theory of Waves in Materials
       Jeremiah Rushchitsky | BookBoon
       Published in 2011, 270 pages

388. Modeling of Sonar Transducers and Arrays
       George Benthien, Stephen Hobbs |
       Published in 2005, 227 pages

389. Environmental Land Use Planning
       Seth Appiah-Opoku (ed.) | InTech
       Published in 2012, 232 pages

390. Heat for Engineers
       Charles Robert Darling | Spon & Chamberlain
       Published in 1912, 460 pages

391. Concise Reliability for Engineers
       Jaroslav Mencik (ed.) | InTech
       Published in 2016, 214 pages

392. Quest for Performance: The Evolution of Modern Aircraft
       Laurence K. Loftin, Jr. | United States Government Printing
       Published in 1985, 547 pages

393. Elements of Signal Detection and Estimation
       Carl W. Helstrom | Prentice Hall
       Published in 1994, 604 pages

394. Ultra-Wideband Radio Technologies for Communications, Localization and Sensor Applications
       Reiner Thoma, et al. | InTech
       Published in 2013, 488 pages

395. Chemical Engineering Vocabulary
       Maximilian Lackner | Bookboon
       Published in 2014, 309 pages

396. Op Amp Applications Handbook
       Walt Jung | Newnes
       Published in 2004, 229 pages

397. Linear Controller Design: Limits of Performance
       Stephen Boyd, Craig Barratt | Prentice-Hall
       Published in 1991, 426 pages

398. Parallel Manipulators, New Developments
       Jee-Hwan Ryu | InTech
       Published in 2008, 498 pages

399. Modern Masonry: Natural Stone and Clay Products
        | National Academies Press
       Published in 1956, 177 pages

400. Mechanics Applied to Engineering
       John Goodman | Longmans, Green, and Co.
       Published in 1914, 880 pages

401. Introductory Electromagnetics
       Zoya Popovic, Branko D. Popovic | Prentice Hall
       Published in 1999, 581 pages

402. Solid State Circuits Technologies
       Jacobus W. Swart | InTech
       Published in 2010, 472 pages

403. Structural Bridge Engineering
       Shahiron Shahidan, et al. | InTech
       Published in 2016, 198 pages

404. Modern Signal Processing
       Daniel N. Rockmore, Jr, Dennis M. Healy | Cambridge University Press
       Published in 2004, 352 pages

405. Continuum Mechanics
       Bob McGinty | ContinuumMechanics.org
       Published in 2014, 336 pages

406. Imaging: Sensors and Technologies
       Gonzalo Pajares Martinsanz (ed.) | MDPI AG
       Published in 2017, 634 pages

407. Aerospace Technologies Advancements
       Thawar T. Arif | InTech
       Published in 2010, 514 pages

408. Optimal Filtering
       B.D.O. Anderson, J.B. Moore | Prentice-Hall
       Published in 1979, 367 pages

409. Thermal Processing of Waste
       J. C. Jones | BookBoon
       Published in 2010, 99 pages

410. Beginner's Guide to Engineering Drawing
       E. R. Latifee |
       Published in 2008, 75 pages

411. Fundamentals of Transportation
        | Wikibooks
       Published in 2009, 185 pages

412. Entertainment Engineering
       John W. Wesner | ETC Press
       Published in 2013, 215 pages

413. Power Quality Harmonics Analysis and Real Measurements Data
       Gregorio Romero Rey, Luisa Martinez Muneta | InTech
       Published in 2011, 278 pages

414. Engineering Mechanics of Solids
       Louis L. Bucciarelli Jr. | McGraw-Hill
       Published in 1994, 258 pages

415. Genes, Technology and Policy
       Jose Maria A. Ochave | UNDP-APDIP
       Published in 2003, 52 pages

416. The Forgiving Air: Understanding Environmental Change
       Richard C. J. Somerville | University of California Press
       Published in 1998, 224 pages

417. Computational Fluid Dynamics
       Hyoung Woo Oh | InTech
       Published in 2010, 428 pages

418. Polymer Science and Engineering
        | National Academies
       Published in 1994, 180 pages

419. Biomimetics: Learning from Nature
       Amitava Mukherjee | InTech
       Published in 2010, 534 pages

420. Supply Chain
       Vedran Kordic | InTech
       Published in 2008, 568 pages

421. Introduction to Continuum Mechanics
       David J. Raymond | New Mexico Tech
       Published in 1999, 142 pages

422. Innovative Inorganic Synthesis
       Duncan H. Gregory | MDPI AG
       Published in 2015, 202 pages

423. An Exploration of Random Processes for Engineers
       Bruce Hajek | University of Illinois at Urbana-Champaign
       Published in 2009, 381 pages

424. The Fundamentals of Signal Analysis
        | Agilent Technologies
       Published in 2000, 68 pages

425. Biotechnology of Biopolymers
       Magdy Elnashar | InTech
       Published in 2011, 364 pages

426. Heat Transfer
       Benjamin Gebhart | McGraw-Hill
       Published in 1961, 454 pages

427. The Smell Of Kerosene: A Test Pilot's Odyssey
       Donald L. Mallick | University Press of the Pacific
       Published in 2005, 252 pages

428. Recent Advances in Robust Control: Novel Approaches and Design Methods
       Andreas Mueller | InTech
       Published in 2011, 462 pages

429. Concrete Engineers' Handbook
       George Hool, Nathan C. Johnson | McGraw-Hill
       Published in 1918, 929 pages

430. Frontiers in Robotics, Automation and Control
       Alexander Zemliak | InTech
       Published in 2008, 450 pages

431. Isometric Drawing
       Alpha Pierce Jamison | McGraw-Hill
       Published in 1911, 92 pages

432. Queueing Theory
       Ivo Adan, Jacques Resing | Eindhoven University of Technology
       Published in 2002, 180 pages

433. A First Course in Fluid Mechanics for Engineers
       Buddhi N. Hewakandamby | BookBoon
       Published in 2012, 145 pages

434. Applications of Nonlinear Control
       Meral Altinay | InTech
       Published in 2012, 202 pages

435. Control and Nonlinearity
       Jean-Michel Coron | American Mathematical Society
       Published in 2009, 444 pages

436. Electronics / Digital
       K.F. Cathey, R.D. Mitchell, R.W. Tinnell, D.A. Yeager | Delmar Publishers
       Published in 1972, 317 pages

437. Think DSP: Digital Signal Processing in Python
       Allen B. Downey | Green Tea Press
       Published in 2014, 159 pages

438. Detection of Abrupt Changes: Theory and Application
       Michele Basseville, Igor V. Nikiforov | Prentice-Hall
       Published in 1993, 469 pages

439. Cities Safer by Design
       Ben Welle et al. | World Resources Institute
       Published in 2015, 104 pages

440. Hydraulics for Engineers and Engineering Students
       F. C. Lea | E. Arnold
       Published in 1916, 598 pages

441. Principles of Highway Engineering
       Carroll Carson Wiley | McGraw-Hill
       Published in 1928, 510 pages

442. Bone Regeneration
       Haim Tal | InTech
       Published in 2012, 340 pages

443. Nonlinear System Theory: The Volterra/Wiener Approach
       Wilson J. Rugh | The Johns Hopkins University Press
       Published in 1981, 338 pages

444. Industrial Robotics: Programming, Simulation and Applications
       Low Kin Huat | InTech
       Published in 2006, 702 pages

445. Sun Power: The Global Solution for the Coming Energy Crisis
       Ralph Nansen | Ocean Press
       Published in 1995

446. Nanomaterials - A Sojourn
       B Viswanathan | National Centre for Catalysis Research
       Published in 2006, 46 pages

447. Industrial Robotics: Theory, Modelling and Control
       Sam Cubero | Pro Literatur Verlag
       Published in 2006, 964 pages

448. Constructive Nonlinear Control
       R. Sepulchre, M. Jankovic, P. Kokotovic | Springer
       Published in 1996, 323 pages

449. The Theory of Linear Prediction
       P. Vaidyanathan | Morgan and Claypool Publishers
       Published in 2008, 198 pages

450. Tongue and Groove Roof Decking
        | AWC
       Published in 2003, 17 pages

451. Applied Mechanics
       Gaetano Lanza | J. Wiley
       Published in 1905, 978 pages

452. Wind Energy Systems
       Gary L. Johnson | Kansas State University
       Published in 2006, 449 pages

453. Fundamentals of Thermodynamics
       J. Karl Johnson | University of Pittsburgh
       Published in 2009

454. Passive Microwave Components and Antennas
       Vitaliy Zhurbenko | InTech
       Published in 2010, 564 pages

455. Mobile Robots Navigation
       Alejandra Barrera | InTech
       Published in 2010, 680 pages

456. Electric Circuits: Theory and Applications
       O.G.C. Dahl | McGraw-Hill
       Published in 1928, 401 pages

457. Engineering a Safer World: Systems Thinking Applied to Safety
       Nancy G. Leveson | The MIT Press
       Published in 2012, 555 pages

458. Wood in Civil Engineering
       Giovanna Concu (ed.) | InTech
       Published in 2017, 248 pages

459. First Steps with Embedded Systems
        | Byte Craft Limited
       Published in 2005, 228 pages

460. Fundamentals of Die Casting Design
       Genick Bar-Meir |
       Published in 2000, 185 pages

461. Actual Ships Stability Problems and The Influence on Safety of Navigation
       Cristian Andrei | Smashwords
       Published in 2016, 143 pages

462. Ferroelectromagnets: Fifty years after discovery
       I. E. Chupis | arXiv
       Published in 2010, 109 pages

463. Verilog Tutorial
       Deepak Kumar Tala | ASIC World
       Published in 2014, 508 pages

464. Tissue Engineering
       Daniel Eberli | InTech
       Published in 2010, 534 pages

465. Concise Hydrology
       Dawei Han | BookBoon
       Published in 2010, 145 pages

466. Carbon Fibers
       Jonathan Phillips (ed.) | MDPI AG
       Published in 2015, 192 pages

467. Continuum Mechanics: Progress in Fundamentals and Engineering Applications
       Yong X. Gan | InTech
       Published in 2012, 158 pages

468. Digital Circuit Projects: An Overview of Digital Circuits Through Implementing Integrated Circuits
       Charles W. Kann | Gettysburg College
       Published in 2014, 96 pages

469. Advances in Cognitive Radio Systems
       Cheng-Xiang Wang, Joseph Mitola III (ed.) | InTech
       Published in 2012, 150 pages

470. Modeling, Simulation and Optimization: Tolerance and Optimal Control
       Shkelzen Cakaj | InTech
       Published in 2010, 312 pages

471. Software Solutions to Problems on Heat Transfer
       M. Thirumaleshwar | Bookboon
       Published in 2013, 750 pages

472. Electromagnetic Waves and Antennas
       Sophocles J. Orfanidis |
       Published in 2008, 1041 pages

473. Elementary Dynamics: a textbook for engineers
       Joseph Whittington Landon | Cambridge University Press
       Published in 1920, 268 pages

474. Digital Filter Design
       Zoran Milivojević | mikroElektronika
       Published in 2009

475. Fuzzy Control
       K. M. Passino, S. Yurkovich | Addison Wesley
       Published in 1997, 475 pages

476. Extension Engineering
       Yang Chunyan, Cai Wen | Science Press
       Published in 2012, 352 pages

477. Mobile Robots: Towards New Applications
       Aleksandar Lazinica | InTech
       Published in 2006, 600 pages

478. Linear Optimal Control
       B.D.O. Anderson, J.B. Moore | Prentice Hall
       Published in 1971, 413 pages

479. Microelectronic Devices and Circuits
       Clifton G. Fonstad | DSpace
       Published in 2006, 698 pages

480. Wind Tunnels
       Satoru Okamoto | InTech
       Published in 2011, 136 pages

481. Enzyme Technology
       Martin F. Chaplin, Christopher Bucke | Cambridge University Press
       Published in 1990, 280 pages

482. Metal Mining and the Environment
       T. L. Hudson, F. D. Fox, G. S. Plumlee | American Geological Institute
       Published in 1999, 68 pages

483. Introductory Well Testing
       Tom Aage Jelmert | Bookboon
       Published in 2013, 103 pages

484. Applied Mechanics
       Alfred P. Poorman |
       Published in 1917, 268 pages

485. The Geography of Transport Systems
       Jean-Paul Rodrigue (ed.) | Routledge
       Published in 2013, 432 pages

486. Control Theory: From Classical to Quantum Optimal, Stochastic, and Robust Control
       M.R. James | Australian National University
       Published in 2005, 89 pages

487. Aircraft Propulsion : a review of the evolution of aircraft piston engines
       C. Fayette Taylor | Smithsonian Institution Press
       Published in 1971, 148 pages

488. Fundamentals of Chemical Reaction Engineering
       Mark E. E. Davis, Robert J. J. Davis | McGraw-Hill
       Published in 2003, 384 pages

489. Introduction to Electronics
       Yatindra Nath Singh, Joseph John | NPTEL
       Published in 2007

490. Robotics and Automation in Construction
       C. Balaguer, M. Abderrahim | InTech
       Published in 2008, 404 pages

491. Integration and Automation of Manufacturing Systems
       Hugh Jack |
       Published in 2001, 593 pages

492. Details for Conventional Wood Frame Construction
        | ICC
       Published in 2001, 55 pages

493. Mechatronic Systems Applications
       A. M. D. Di Paola, G. Cicirelli | InTech
       Published in 2010, 360 pages

494. Bioethanol: Science and technology of fuel alcohol
       Graeme M. Walker | BookBoon
       Published in 2010, 114 pages

495. Microsensors
       Igor Minin | InTech
       Published in 2011, 294 pages

496. Railway Research: Selected Topics on Development, Safety and Technology
       Krzysztof Zboinski (ed.) | InTech
       Published in 2015, 204 pages

497. Fundamentals of Electrical Engineering and Electronics
       Tony R. Kuphaldt |
       Published in 2007

498. Advances in Measurement Systems
       Milind Kr Sharma | InTech
       Published in 2010, 598 pages

499. Mechatronic Systems: Simulation Modeling and Control
       Annalisa Milella Donato Di Paola, Grazia Cicirelli | InTech
       Published in 2010, 306 pages

500. The Scientist and Engineer's Guide to Digital Signal Processing
       Steven W. Smith | California technical Publishing
       Published in 1999, 650 pages

Free Mathematics Books
Free Physics Books
Free Programming Books
Free Astronomy Books
Free Medical Books

E-Books Directory -> Home Page